FEYNLAB® PRIME

PRODUCT DESCRIPTION
PRIME is the second step in the FEYNLAB optimal bonding system. After using FEYNLAB® PURE WASH (step 1) to clean the surface, PRIME is used as the decontamination or ‘clay bar’ lubricant.
The name is born from its function. PRIME fills in the micro voids of the paint structure with nano particles for an enhanced surface for coatings to adhere to. This increased surface area and chemical bonding allows all FEYNLAB® coatings unrivaled adhesion to the painted surface. The result is optimal ceramic nano coating durability and performance.

PRODUCT BENEFITS
True nano technology formula allows deep cleansing within the paint’s pores.
Prime lays down base chemistry within the porous paint structure, enhancing the bonding of ceramic coatings.
Can double as a surface prep for laying vinyl and paint protection films as well.
FEYNLAB’s® true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

INCLUDED
250ml or 1000ml of Concentrate

DILUTION RATIO
For Clay Lubricant:
Mix to a 1:15 dilution. 1 part Concentrate to 15 parts Water in a spray bottle for clay lubricant (you can use the measurement tool on the bottle.)
For Surface Prep:
½ oz : 32 oz Spray Bottle

INSTRUCTIONS FOR USE
Clean the surface with FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS to thoroughly clean surface of loose or topical contamination that might inhibit product effectiveness.
Prior to use, place vehicle in a well-lit, temperature-controlled 50°F-85°F (10°C-30°C), & contamination free environment.

For Clay Lubricant:
Apply liberally to panels in order to adequately lubricate the surface for a clay bar or decontamination mitt. After the physical decontamination is completed, simply wipe off any remaining product with a microfiber drying towel.

For Surface Prep (before ceramic coating, or laying vinyl / PPF):
Use two clean microfiber towels: Towels A & B.
LIBERALLY apply PRIME to saturate Towel A.
Wipe Towel A thoroughly over the surface, leaving an even trail of product over the panel.
Immediately follow with Towel B to dry and wipe the panel clear.
Wait at least 10 minutes before applying ceramic coating, vinyl, or PPF

NOTES
PRIME penetrates so deeply into the paint’s structure, a large amount will remain after a single stage polish, helping to promote optimal adhesion and performance of all FEYNLAB coatings.

SHELF LIFE
2 years (In a normal, climate-controlled environment)