FEYNLAB® F50-M SUPER HEAVY CUTTING COMPOUND

PRODUCT DESCRIPTION

FEYNLAB® M50 SUPER HEAVY CUTTING COMPOUND is the most advanced cutting compound in the marine market. FEYNLAB® M50 SUPER HEAVY CUTTING COMPOUND contains the most advanced ceramic aluminum-oxide abrasives. These abrasives are incredibly hard and microscopically sharp compared to the competition. This means more cutting, less diminishing of abrasives, and a reduction in product used compared to the competition. The M50 compound has been specifically developed to be able to compound and remove swirls and even deeper scratches from gel-coat surfaces with ease.

PRODUCT BENEFITS

• Effortless removal of even the deepest surface imperfections.
• Perfect for heavily used or oxidized vessels prior to FEYNLAB® marine coating systems.
• Fast and consistent cut.
• Cost saving as less product is needed when compared against the competition.
• Easy to use.

APPROVED SURFACES
APPROVED SURFACES FOR APPLICATION – DO NOT apply to unapproved surfaces*

• Gel-Coat Surfaces
• Painted Surfaces

*The use of Feynlab products on any surface not explicitly listed in the instructions booklet is done at the user’s own risk. If damage occurs to the surface as a result of using the product on an unlisted surface, we will not be held liable for any such damage.

INCLUDED
1 kg or 5 kg (Jerry Can) of FEYNLAB® M50 SUPER HEAVY CUTTING COMPOUND

CAUTIONS
We encourage to always wear gloves, an approved face mask and eye protection when using any compounds or polishes.

PREPPING THE SURFACE

• Place vehicle in a well-lit, cool, & contamination free environment.
• Remove any excessive surface dirt and contaminants using one of FEYNLAB’s® marine washes.
• If necessary, clay the surface to remove any surface bonded contaminants.

ROTARY POLISHER DIRECTIONS

• Shake the bottle vigorously before use, making sure polish is completely and thoroughly mixed. It can separate when it sits on the shelf for any length of time.
• Prime the wool pad by placing 4 dime-size dots and spread around on the area to be
• In general, begin with a 2-foot x 2-foot section. Decrease working area if heavier correction is
• Using a speed of no more than 1600 rpm, make 2 – 4 slow passes over the given
• Wipe clear with a clean microfiber
• Check your results from multiple angles to ensure you have left zero
• Admire your work. Take lots of pictures. Brag about it to your friends and give the FEYNLAB® team a virtual high five!

DUAL-ACTION (DA) POLISHER DIRECTIONS

• Shake the bottle vigorously before
• Prime the microfiber cutting pad by placing 4 dime size dots and spread around on the area to be corrected.
• In general, begin with a 2 x 2-foot section. Decrease working area if heavier correction is
• Using a speed of 3400 – 4000 opm, make 2 – 4 slow passes over the given
• Wipe clear with a clean microfiber
• Check your results from multiple angles to ensure you have left zero
• Admire your work. Take lots of pictures. Brag about it to your friends and give the FEYNLAB® team a virtual high five!

SHELF LIFE
2 years in a normal, climate-controlled environment.