FEYNLAB® INDUSTRIAL V2

PRODUCT DESCRIPTION

FEYNLAB® INDUSTRIAL COATING is a high-solids, single-component coating with excellent chemical, abrasion, and UV resistance. FEYNLAB engineered this coating specifically for applications where long-life aesthetics are required, even in the harshest environments.

FEYNLAB® INDUSTRIAL COATING is intended for EXTERIOR USE ONLY.

PRODUCT BENEFITS

FEYNLAB® INDUSTRIAL is a multi-purpose coating which can be applied to most hard surfaces. While the results are excellent on painted or colored plastic surfaces, the coating can also be applied to stone, wood, and concrete to seal the surfaces from staining and losing their color due to UV degradation.

FEYNLAB® INDUSTRIAL is also performs well in high wear areas, such as handrails and has excellent abrasion resistance.

FEYNLAB® INDUSTRIAL is extremely hydrophobic with excellent releases properties. As a result, you can save money by reducing the required cleaning intervals and reducing your re-paint intervals.

APPROVED SURFACES FOR APPLICATION – DO NOT apply to unapproved surfaces:

• Painted Metal & Other Painted Surfaces
• Colored plastics
• Stone
• Wood
• Concrete

INCLUDED

FEYNLAB® INDUSTRIAL COATING – 275ml or 1L

Best to apply using the FEYNLAB White Microfiber Foam Applicator Pads. The unique weave allows for a more even application. SOLD SEPARATELY

COVERAGE RATES

The coverage rates vary depending on application and porosity of the surface. However, expect approximately 400 sq. ft. per Liter or 100 sq. ft. per 275ml bottle.

CAUTIONS

Always be sure to use all PPE equipment during use of FEYNLAB® INDUSTRIAL. This includes nitrile gloves, safety glasses, and an approved n95/p100 respirator. Make sure the application area is well ventilated to allow fumes to dissipate quickly. Avoid all skin contact. Do not ingest. Keep out of reach of children. In case of accidental skin or eye contact, rinse immediately and thoroughly with water.

Test in an inconspicuous area of any surface prior to treating a large area.

DO NOT apply indoors or in areas that are not well ventilated.

SURFACE PREPARATION

• Painted Surfaces or Colored Plastics – Wash thoroughly with FEYNLAB® PURE WASH followed by a wipe-down with a degreaser such as Acetone. Allow surface to dry completely.
• Stone, Wood, Bare Metal, Concrete – Wash thoroughly with FEYNLAB® PURE WASH. Allow surface to dry completely.

Instructions are made available to certified installers only.