FEYNLAB® CERAMIC WHEEL & CALIPER

FEYNLAB® CERAMIC WHEEL AND CALIPER was developed to protect from harsh conditions of vehicle wheels and turn wheel cleaning into easy mode!. This THICK & Durable ceramic nano coating invites extreme conditions because it was designed for high temperatures and a constant barrage of intense contamination.

Benefits:
With an extremely high solids content (70%), FEYNLAB® CERAMIC WHEEL AND CALIPER will stand up to the daily beating delivered by road contamination and brake dust.

Adevărata nanotehnologie și chimia de aderență ale FEYNLAB™ permit un nivel de protecție fără egal, deoarece formula pătrunde mai adânc în structura vopselei existente decât orice altceva disponibil.

Durability & Application Surfaces:
Durability: 1 Year

Aplicarea include 1 strat de componentă, atingând o grosime totală a peliculei între 1-2 microni.

SUPRAFEȚE APROBATE DOAR PENTRU APLICARE: – NU aplicați pe suprafețe neaprobate

• Jante vopsite lăcuite & etriere
• Chrome surfaces

Shelf Life:
Unopened – 1 year. Opened – Use within 7 days.

Inclus:
30ml (1oz) FEYNLAB® CERAMIC WHEEL & CALIPER

Precauții:
Purtați întotdeauna respirator & mănuși în timpul aplicării. Asigurați-vă că zona de aplicare este lipsită de contaminare desprinsă.

Pregătirea vopselei:
Thoroughly clean wheels & calipers using FEYNLAB® PURE WASH vehicle to remove all topical contamination. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After cleaning and polishing to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.

Mod de utilizare:
Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2 or 3 microfiber sponge applicators, 1 foam applicator on hand BEFORE application.

Shake WHEEL & CALIPER vigorously for 2 min before use. Open the bottle and allow the coating 1min of air exposure.

CERAMIC WHEEL AND CALIPER – Application Instructions:

• Apply a small amount of CERAMIC WHEEL & CALIPER to a microfiber applicator and spread evenly over the wheels or calipers. The amount of product should be enough to evenly coat the area without over saturation.
• Allow CERAMIC WHEEL & CALIPER to dwell for 25-30min. Dwell times over 40 min make removal MUCH more difficult.
• After application is complete, remove coating in same pattern as application with a Microfiber towel.

Suprafața maximă recomandată de aplicare:
Coat 2 full wheels, or 4 wheel faces, then wipe off; following the same pattern as application.

Best Practice: Combine WHEEL & CALIPER with OVERCOAT. This powerful combination provides wheels with: durable protection and extraordinary hydrophobic and self cleaning traits, including incredible ease of maintenance.

Inspecția finală:
Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.

Layering:
Although one layer of CERAMIC WHEEL AND CALIPER is sufficient to achieve the 1 year durability on clear-coated painted surfaces, another coat may be applied to any area to gain additional thickness.

To layer CERAMIC WHEEL & CALIPER, wait at least an hour after final wipe off of first layer. For best results and performance wait 1-3 hours between second later. Do NOT layer after 3 hours.

Infrared Curing (Required):
Bake each panel with an IR lamp to reach a surface temperature of 60°C (140°F) for 15min at a distance of ~ 30-36″ from the panel.

Post Application Instructions:

• Evitați orice expunere accidentală la apă timp de 24 de ore. Dacă se întâmplă, ștergeți ușor apa de pe suprafață.
• Evitați toate substanțele chimice, inclusiv spălătoriile auto, timp de 7 zile.
• If the vehicle must be released in wet conditions before 24hrs after the final coating, then apply FEYNLAB® DETAILER after 2-4 hours of curing time.
• Spălați & întrețineți folosind FEYNLAB® PURE WASH sau FEYNLAB® PURE RINSELESS.

Climate Notes:
Toate acoperirile FEYNLAB® sunt supuse unor ferestre diferite de timp de acțiune și întărire, din cauza umidității și a temperaturii. În general, cu cât nivelul de umiditate este mai ridicat, cu atât acoperirea se va întări mai repede. Dacă nivelul de umiditate se apropie de 75% sau mai mult, luați în considerare reducerea timpilor recomandați de acțiune și ștergere pentru acoperire.

Additionally moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle.

Coatings are best applied in temperature controlled environments of  10°C-30°C (50°F-85°F), with humidity as low as possible.